Bilva Villas
Exquisitely designed 3 & 4 Bedroom Villas at state highway, moka road, contemporary, minimalist, well crafted
SPECIFICATIONS
EARTH WORK EXCAVATION
Foundation Trenches, for all clauses of soil including cutting Shoring, Strutting, dewatering etc.
For column Foundation as per design in Size Rubble Foundation: 60 x 60 cm in Size
PCC BELOW COLUMN FOUNDATION
Plain Cement Concrete 14:8 using 40MM downgraded aggregates as per Standard Structural Specification
RCC COLUMN FOOTING
Reinforced Cement Concrete 11.5.3 using 20MM as per Standard Structural Specification
RR FOUNDATION WORK
60cm x 60cm fitting and packing of Rubble with available soil.
RR BASEMENT SIZE STONE MASONRY)
45cm x 45cm Eitting and packing of Rubble in cement mortar 16 as per Standard Architectural Specification
PLINTH BEAM (RCC BELT)
Reinforced Cement Concrete in 15:3 or m20 as per Structural Drawings.
Size shall be 45 x 15 cm as per Standard Structural Specification
BACKFILLING WORK
Filing in basement shall be done with available Red Earth or Slurry Dust.
BLOCK WORK
Good Quality Brick Masonry in 115/230mm thickness: Cement Mortar in 1:6
PARAPET WORK
Single Brick/Block Work shall be used for the Parapet Work Floor level concrete work to be 14 as per Standard Architectural
FLOOR SCREEDING WORK
Floor level concrete work to be 14 as per Standard Architectural Specification
RCC COLUMNS
RCC shall be build using 20mm Downgraded aggregates in M25 (112) Mix as per the given structural drawings
RCC BEAMS
RCC Beams shall be build; using 20mm DowNgraded aggregates in M20 Mix as per the given structural drawings
RCC SLABS
Downgraded aggregates in M20 Mix as per the given structural drawings
RCC SUN SHADES
RCC Sun Shades shall be bulld using 20mm Downgraded aggregates in M20 Mix as per Standard Architectural Specification
RCC STAIRS
RCC Stairs shall be build; using 20mm Downgraded aggregates in M20 Mix as per Standard Architectural Specification
RCC LINTEL
RCC Lintel shall be build using 20mm Downgraded aggregates in M20 Mix as per the given structural drawings.
REINFORCED STEEL
Fixing Steel Reinforcement High Yield Strength Deformed Bars Conforming to Fe 500/550) for RC.C in all items.
Work including transporting, 1 coiling, cutting, straightening, bending and placing in position at all levels & binding with approved gauge binding wire MAKE. Kamadhenu. BMM. Indus, Srusti or equivalent brand
CEMENT
43 Graded Ordinary Portland cement or Portland Pozzolana Cement of Maha, Dalmia, Chettinad Rama, Penna or Equivalent brand shall be used for all the works
SAND
Good Quality sand shall be used for all RCC and Super Structural Works Approved quality Sand/Slag which is specially graded for the plastering purpose shall be used for all plastering works as per the availability in the open Market
JOINERY WORK or WOOD WORK IFRAMES WITH FLAT & RODS)
a) Good Quality Imported Hard Wood (HONNE/INDIAN TEAK shall be used for all the windows and Door Frames in size of 12.5cm X 6.5cm.
b) Main door frame shall be Teal Wood in sire of 15cm X 75cm.
c) Main Door Shutter shall be Teak wood in size of 32MM.
WINDOWS
Good Quality 3 track UPVC window with safety grills.
INSIDE PLASTERING WORK
Inside Plastering Work shall be in Cement Mortar 16 with 9 to 12 MM Thickness
CEILING PLASTERING WORK
Ceiling plastering work shall be in 1:4 Cement Mortar below 10MM Thickness
OUTSIDE PLASTERING WORK
Outside wall Plastering Work shall be in Cement Mortar 15. 12 to 15 MM Thickness
HANDRAILS
Stainless Steel Handrails shall be used in Staircase Areas and upper living Cut-Off Areas
ELECTRICAL WORKS
a).Cables Vasavi, Finolex. V-Guard or equivalent brand,
b). Switches & Sockets Modular Switches & Sockets by approved brands
Mebs Indo Aslan HPL Benel or equivalent brand Final Fittings such as Fancy Lighting & Ceiling Fans should be provided by the Client at Site
CAR PORCH TILES
Good Quality tiles shall be used (Choice of Design Colour & Brand as per the Client, Priced at Maximum Rate of Rs.45/- per Sqft)
FLOORING TILES
Gloss Nanotechnology Cm x 80cm or 80cm x 120cm Vitrified Tiles shall be used for all Carpet Areas, Except Bathrooms (Choice of Design. Colour & Brand as per the Client:
Priced at Maximum Rate of Rs.100/- per Sq.Ft)
SKIRTING TILE WORK
Gloss Nano Technology Vitrified Tiles shall he used for all skirting portions (10Cm Height)
KITCHEN DADOING WALL TILES
Dadoing tile Works shall be done above the kitchen slab (Choice of Design Colour with Good Quality tiles (Size: 45 x 30 cm Brand as per the Client, Priced at Maximum Rate of Rs 58/- per Sq Ft)
WATER PROOFING WORK
Toilets and Terrace floor waterproofing shall be done.
KITCHEN TOP
Good Quality Granite Slabs Shall be used for the kitchen Top (Priced at Max Rate of Rs 165/- per SA
BATHROOM FLOORING TILES
Good Quality Anti Skid Tiles shall be used for all Bathrooms Size 30 x 30 Cms
(Choice of Design Colour & Brand as per the Client: Priced at Maximum Rate of Rs 45/- per Sq F)
BATHROOM WALL TILES
Good Quality Bathroom Wall Tiles Size: 45 shall be Used Choice of Design, Colour
30 Cms) of Highlighter Model upto a maximum height of 7 Feet Brand as per the Client Priced at Maximum Rate of Rs 45/- per Sq Ft
BATHROOM DOORS
All Bathroom Doors Shall be done using Branded Flush Doors (Choice of Design Colour & Brand as per the Client, Priced at Maximum Rate of Rs.3600/- per Door
WOODEN POLISH
Main door and Frame Surfaces shall be polished with Good Quality sealer Wood Stainer and over coat shall be cleared with Melamine
PUTTY WORKS
Putty works shall be done in all the interiors areas and also on the Exterior front Elevation Areas. MAKE Asian NCL. Birla or JK Wall Putty
PAINTING WORK
b) Out Side One coat of Primer
a) Inside Single Coat Cement Primer shall be used all over the Plastered Area. Two coat of Cement Based putty and Two Coats of Acrylic Emulsion for all internal walls (MAKE Asian, Nippon or equivalent brand and Two coats of Exterior Emulsion Paints (MAKE Asian, Nippon, or equivalent brand)
d. All Windows and rod should be in 1 coat of Wood primer, 1 coat of Putty and 2 coat of Enamel paint.
(MAKE Asian, Nippon, or equivalent brand)
FRONT DOOR - BED ROOM DOORS KITCHEN DOORS
Front Door Teak wood Bed Room Doors and Kitchen doors shall be made with Standard Size of Good Quality Flush doors
GRILL WORK
Thility ar Balcony Wall Grills shall be provided using 10mm MS-Reds.
DOOR AND WINDOW FITTINGS
a) All Fittings like Hinges, Tower Bolts and Mortise Lock shall be provided from Stainless Matt Finish
b). Main Door Fittings shall be of Brass (Max Rate for Main Door Lock Rs.3000/- and All other Door Locks: Rs.700/- MAKE. Godge Europa. Doorset Yale.
ANTI-TERMITE TREATMENT
Against attack by subterranean termites, Chemical Treatment shall be implemented by experts baving special know-how to ensure uniform distribution and proper penetration
PLUMBING AND SANITARY WORK
PVC AND CPVC/UPVC PIPES ACCORDINGLY (MAKE ASHIRVAD OR SUPREME
All taps and commode, sinks etc - MAKE Cera, Hindware,RAK.Sanit.
LANDSCAPING & GARDENING
Complimentary
sangankallu grama